SELF-MADE TRI-AXIAL ACCELEROMETER DESIGN CONSIDERATIONS FOR VALIDATION OF SIMULTANEOUS MULTI AXIS ACCELEROMETER CALIBRATION SYSTEM |
|---|
| C. S. Veldman |
- Abstract:
- This paper describes geometric design consideration for the creation (manufacture) of a tri-axial accelerometer intended for the validation of multi axis calibration systems that implements simultaneous axis calibration methods. Two mounting geometries were investigated, and the results obtained using them are reported. The one configuration, a cube with counterweights. The second configuration see the accelerometers mounted on “recessed” faces, aiming at placing (aligning) the individual accelerometers close to the vibration excitation vector.
- Keywords:
- tri-axial; accelerometer; simultaneous; calibration
- Download:
- IMEKO-TC22-2022-025.pdf
- DOI:
- 10.21014/tc22-2022.025
- Event details
- IMEKO TC:
- TC22
- Event name:
- TC22 Conference 2022
- Title:
5th TC22 Conference on Vibration Measurement (together with the 24th TC3 Conference on the Measurement of Force, Mass and Torque, the 14th TC5 Conference on the Measurement of Hardness, and the 6th TC16 Conference on Pressure and Vacuum Measurement)
- Place:
- Cavtat-Dubrovnik, CROATIA
- Time:
- 11 October 2022 - 13 October 2022