ANALYSIS OF CUTTING FORCES IN TURNING OF WORKPIECE WITH A SLOT |
|---|
| Tomislav Baškarić, Darko Damjanović, Miroslav Duspara, Dražan Kozak, Todor Ergić, Antun Stoić |
- Abstract:
- Cutting forces in turning process are analyzed in this paper. Workpiece has a circular cross section with a slot. The measurements are performed using dynamometer made from turning tool with tensometric tapes placed on it. The main cutting force Fc, radial force Fp and feed force Ff are obtained by recalculating of the measured strains on turning tool.
The aim of this paper is to determine the effect of slot on the cutting forces in turning process in order to determine optimal processing parameters. Turning of workpiece with a slot rarely occurs in practice, but that case is analogous to the milling in case when the milling tool enters the workpiece. - Download:
- IMEKO-YSESM-2011-ea09.pdf
- DOI:
- -
- Event details
- IMEKO TC:
- TC15
- Event name:
- TC15 Youth Symposium 2011
- Title:
10th Youth Symposium on Experimental Solid Mechanics (TC15)
- Place:
- Chemnitz, GERMANY
- Time:
- 25 May 2011 - 28 May 2011