CONSITENCY PROFILE MEASUREMENT IN PULP BASED ON ELECTRICAL IMPEDANCE TOMOGRAPHY
Shaomin Zhou, Jouko Halttunen
Abstract:
This paper describes a low cost system to measure the consistency profile of pulp based on electrical impedance tomography (EIT). A 16-electrode sensor is applied to acquire the cross-sectional data. Data acquisition is controlled by a single-chip computer, which receives commands from host computer, initializes hardware, acquires data and sends them to host computer via a serial port. All the measurement parameters such as the amplitude and frequency of the injected current can be set by software in host computer. The consistency profile image is reconstructed by modified Newton-Raphson algorithm. Comparing to conventional method, it is non-invasive and low cost.
Keywords:
tomography, EIT, consistency profile
Download:
PWC-2003-TC7-025.pdf
DOI:
-
Event details
Event name:
XVII IMEKO World Congress
Title:

Metrology in the 3rd Millennium

Place:
Dubrovnik, CROATIA
Time:
22 June 2003 - 28 June 2003
 Back